The S6000HT Series is an anti static tape, made of Polyester film, coated with a surface conductive adhesive. This tape is used for masking of printed circuit boards during conformal coating, amongst other applications. It leaves no adhesive residue after removal.
Supporting Base: Polyester Film
Adhesive: Synthetic Conductive Resin
Base Thickness: 0.025 mm
Total Thickness: 0.055 mm
Tensile Strength: 40 N/cm
Electrical Resistance (Adhesive): 50000-100000 ohms/cm.
Temperature Resistance: Up to 130º C
Adhesive Strength: 27 OZ/inch (3.0 N/CM)
Core Type: Plastic
Core Size: 3”
Standard Roll Width*: ¼”, ½”, ¾”, 1” & 2”
(6, 12, 18, 24 & 48 mm)
Standard Roll Length: 72 Yards
Standard Roll Length: 36 Yards
* Other widths available upon request.
Statements, technical information and recommendations contained herein are based on tests we believe to be reliable but they are not to be construed in any manner as warranteies expressed or implied. the user shall determine the suitability of the product for his intended use and user assumes all risk and liability whatsoever in connection therewith.
This product should be kept away from direct exposure to sunlight and must be stored in a ventilated storage environment with temperature of 20° C.